Waterproof Coating
Product overview
This product is based on modified acrylate copolymer as base material, adding a variety of additives, filling materials, through the strict scientific process processing made of a single group of waterborne polymer waterproof coating.
Adaptive range
The utility model is suitable for waterproofing, seepage prevention and moisture proofing of roofs, walls, toilets, baths, basements, pools, bridges and tunnels of various old and new buildings and structures.
Product features
¡ñNon-toxic and tasteless environmental protection products;
¡ñThe coating has high elasticity, high strength and high adhesive force;
¡ñAcid resistant, alkali resistant, high temperature resistant, UV resistant and anti-aging;
¡ñThe elongation is large, and the adaptability to the shrinkage and deformation cracking of the base is stronger;
¡ñThermal dimensional stability, low temperature flexibility, water resistance and good crack resistance;
¡ñIt can be constructed on the base of wet and dry material, and the bonding force is firm;
¡ñCold construction, simple construction, short construction period, no pollution, convenient maintenance;
¡ñCan add color as finishing material.
basic level processing
At the grassroots level should be no oil and no pollutants, such as dust, flat, dry and solid basic requirements, and set the base crack root groove, and a sealing material for sealing block, then to do additional layer, yin and yang angle should be made into arc shape, corner radius is larger than 25mm, corner radius is larger than 5mm.
¡ñThree times brushing method:
Three, the total thickness of about: 1.5mm, the total amount of material about: 2.7kg/m2, applicable to general construction waterproof.
¡ñFour times brushing method:
The total thickness of the four layers is about 2.0mm, and the total material used is about 3.5kg/m2. It is suitable for building waterproof works with single fortification
¡ñAdding reinforcing layer brushing method:
Total thickness: 1.5-2.0mm, the total quantity of materials: 1.82-2.52kg/m2, suitable for large deformation of waterproof engineering and different parts (qianggen, gutter, eaves gutter, yin and yang angle) enhancement.
Matters needing attention during construction
¡ñThe next coating must wait until the upper coating has been dried. During construction, if the paint is precipitated, it should be stirred and used evenly;
¡ñThe upper and lower directions should be perpendicular to each other;
¡ñThe construction of the reinforcing layer can be immediately covered with polyester non-woven fabric or nylon reinforced mesh cloth when the first coating is coated, and the reinforcing layer shall be laid flat;
¡ñAfter the completion of the coating construction, the natural maintenance should be 7-9 days.
Construction acceptance
The construction of environmental temperature is over 5 DEG C, rainy days do not have Mingshui or base construction;Waterproof coating should be completely dried, surface decoration can be carried out;The waterproof finished product shall be segregated so as not to damage it.
HOTLINE£º400-651-9639
Fax:0086-(0)536-5078169
TEL£º13665369397¡¡0536-5078169
EMAIL£ºhuaguangzdh@126.com
ADDRESS£º6th Floor,Yuqing Building, 518# Yuquan Road, High-tech Development Zone, Weifang City, Shandong Province, P.R.China.
ALL RIGHTS RESERVED ©THE COPYRIGHT HUAGUANG WATERPROOF MATERIALS LIMITED BY SHARE LED.
ICP£ºÂ³ICP±¸13030805ºÅ-1 TECHNICAL SUPPORT:QIHUA NETWORK